Erik BECKERT(Fraunhofer Institute for Applied Optics and Precision Engineering, Jena, Germany) “A Space-Suitable, Miniaturized 100 mW DPSS Laser at 532 nm for JAXA’s Phobos Mission”
Raoul-Amadeus LORBEER(DLR, German Aerospace Center, Stuttgart, Germany) “Compact Laser Pumping and Amplification Concept using a Wedged-Thin-Disk”
Yung-Fu CHEN(National Chiao Tung University, Taiwan) “Fast model for optimizing passively Q-switched lasers”
Sreenath GUPTA(Argonne National Laboratory, USA) “Development of a Laser Igniter for a Syngas Fueled Direct-Fired Supercritical CO2 Cycle”
Hideki MORIAI(Kanazawa Institute of Technology, Ishikawa, Japan) “Laser Propulsion Research – Conversion of Laser Energy into Thrust in Space”
Xavier MATEOS(Universitat Rovira i Virgili, Tarragona, Spain) “Structured Materials for Micro-Lasers at 2 μm”
Jan HOSTAŚA(CNR-ISTEC, Institute of Science and Technology for Ceramics, Faenza, Italy) “2D-Structured Ceramic Laser Gain Media, Laser Waveguides”
Gerhard KROUPA(Silicon Austria Labs., Villach, Austria) “Fibre Distribution Tests and Recent Applications of the Miniaturized HiPoLas Ignition System” – Withdraw –
Lukas SCHRÖDER(University of Bayreuth, Bayreuth, Germany) “Combustion Analysis of a Laser-Based and an Electrical Ignition System for Directly Injected Methane in a Rapid Compression Machine”
Takunori TAIRA(RIKEN SPring-8 Center, Hyogo, Japan) “Tiny Integrated Lasers towards Giant Micro-photonics”
Akio IKESUE(World Lab. Co. Ltd., Nagoya, Japan) “Historical Turning Point of Optical Ceramics”
Mariastefania DE VIDO(Science and Technology Facilities Council, Swindon, UK) “Energy Scaling of High Pulse Rate Diode-Pumped Solid State DiPOLE Laser Amplifiers”
Hiroaki MINAMIDE(RIKEN Center for Advanced Photonics, Sendai, Japan) “High-Brightness Injection-Seeded Backward Optical Parametric Oscillation in Sub-Terahertz-Wave Frequencies”
Hiroaki FURUSE(Kitami Institute of Technology, Hokkaido, Japan) “Non-Cubic Fluorapatite Laser Ceramics by Controlling Crystal Grains”
Toshiki SUGIMOTO(Institute for Molecular Science, Okazaki, Japan) “Development of Nonlinear Optical Spectroscopy to Break through the Detection Limit of Nanoscale Interfaces”
Koji MORITA(National Institute for Materials Science, Tsukuba, Japan) “Fabrication of Infrared Transparent Ceramics through Spark-Plasma-Sintering (SPS) Method”
Franz KÄRTNER(University of Hamburg, DESY, Hamburg) “To be decided!”
